AIM SMARTYCAM HD 84" + 4M REV 2.1

RM 8,390.00

The Aim SmartyCam HD Rev 2.1, 84° Powerboat Video Logger Camera, is ideal for outside installation, where a wider field of vision (FOV) is needed.               ...

Add to Wishlist
Availability : In Stock Pre order Out of stock
Categories: AIM, Brands, Devices, Products
Description

The Aim SmartyCam HD Rev 2.1, 84° Powerboat Video Logger Camera, is ideal for outside installation, where a wider field of vision (FOV) is needed.                           


The SmartyCam HD Rev 2.1 84° Wide Powerboat Video Camera has been designed for Motorsports with a single purpose, providing great videos that include all the technical information that will help you improve your performance. All this in the most robust and reliable system ever.


Powerboat Video Camera


SmartyCam HD is Now Available in 67° and 84° Wide Angle Lenses


SmartyCam HD is Now Available in 67° and 84° Wide Angle Lenses

 

SmartyCam HD Rev. 2.1 Competitive Advantages

SmartyCam HD Rev. 2.1 Competitive Advantages


 Real Time Data Overlaid on Videos


SmartyCam HD overlays all the data you need from different sources. From GPS i.e. track map and vehicle position, as well as speed, lap and split times. From Aim loggers connected to your ECU i.e. RPM, throttle, engaged gear, acceleration, temperatures, pressures and – in presence of additional sensors – also their values. All these info will be overlaid on videos in each single point of the track.

Here is just an example among the many available:

Real Time Data Overlayed on Videos




Smartycam Motorsport Camera


Race Studio 3


Your Software for Video Configuration and Analysis
SmartyCam HD uses Race Studio 3, the powerful software which allows to configure all details of your videos and to get plenty of fun and information out of them.


Configuration


You can configure your overlays in a virtually infinite variety of modes: add your logo and the track map, and choose your graphic objects from a list of predetermined sets with same layout or even single objects from different sets. Your videos will be truly “yours” in all details, from the data to their graphic layouts.


Race Studio 3 Configuration


Race Studio 3 Configuration views


Video Analysis


The video of a whole session, once downloaded on your PC, can now be split – with a simple click – in individual videos of each lap: so that you can simultaneously watch two of them and check where you were faster or slower. The same operation can be performed with any SmartyCam HD video recorded on the same track: you will be able to compare your best lap with your friends personal best!

Video Analysis


Automatic Start & Stop


You are on the starting grid, ready to sprint, your adrenaline reaching the climax: the last thing you can worry about is… switching on the camera. You have other things to worry about. SmartyCam HD Rev2 is aware of that, that is why it switches on/off automatically and starts/stops recording the same way.

Automatic On/Off Switch


SmartyCam HD can be switched on by the logger it is connected to. Switch-off is automatic, too: simply decide after what period of non-activity the camera will switch-off. Both operations can also be carried out using the keyboard, if you prefer.


Recording


Recording can also be started/stopped automatically or via keyboard. With automatic switch-on, the camera will start recording when the speed or RPM threshold is exceeded. In this case, you simply decide how long after dropping below the selected threshold the video will automatically stop.


Automatic Start & Stop


No “wave effect” and Improved Quality with The New CMOS Sensor


Engine rumble causes vibrations, which are not a good thing for video recording. Never again will you experience that seasick “wave effect” you get when watching videos recorded by a generic camera, when the car rolls at 7000 RPM. SmartyCam HD has been designed for that environment and for those vibrations. “Wave effect” is just a memory.


No “wave effect” and Improved Quality with The New CMOS Sensor


The Global Shutter CMOS Sensor


The Global Shutter CMOS Sensor

Unlike generic multipurpose cameras, SmartyCam HD has been designed to avoid the problem of image distortion, thanks to the innovative Global Shutter CMOS sensor. The camera shutter captures the entire image at the same time, not “pixel by pixel” like traditional sensors. The result is that images are captured at once and are not affected by the vibrations that happen on a racing vehicle, which create the so-called “wave effect”.


Proprietary Lenses Designed for Motorsports

A lens specifically designed for Motorsports must be robust, must be able to work when the engine rolls 100 times per second, and have good resolution and brightness. But above all a lens designed for Motorsport must reduce distortion, which is a typical problem of lenses used by generic action-cameras: objects placed at ten metres’ distance look very far, making it impossible to accurately determine whether the track is straight or curved. SmartyCam HD telecentric lens with six elements reduces distortion to the minimum and will withstand track vibrations for years. Moreover the lenses with different HFOV’s allow a tailor-made framing in all kind of vehicles.


Which Lens?

The narrow 67° HFOV lens is preferred for closed-roof cars, as it “sees” the track just within the wind-screen pillars, reducing that unpleasant black frame around typical of generic camera on-board videos.

The wide 84° HFOV lens is specific for open-roof, formula car and kart use, where it is possible to have a more ample view of the track and there is no risk of black frames.


Which Lense?


The narrow HFOV lens is preferred for closed-roof cars, as it “sees” the track just within the wind-screen pillars, reducing that unpleasant black frame around typical of generic camera on-board videos.


Narrow lense


The wide HFOV lens is specific for open-roof, formula car and kart use, where it is possible to have a more ample view of the track and there is no risk of black frames.


The wide HFOV lens


Front Mount Colour TFT Display For In-Car Installation

On-board cameras are to be installed inside the car. Where should the display be placed to check the correct position of the camera? The SmartyCam HD 128x128 pixel TFT colour display is on the front, not on rear – where general cameras place the viewfinder


Front Mount Color TFT Display


 High Motorsport Quality – Small Size Video Files

Most other HD cameras are focused on the highest pixel number. The result is that their video files are far too large, taking too much memory. SmartyCam HD videos have the same quality as other HD cameras but their files are smaller because the H264 compression system parameters have been optimised to a perfect balance between video quality and file size.

You can choose among three video file quality levels: one-hour recording takes 4GB (high quality), 2GB (normal) or 1,5GB (low). Files are stored on SD cards: with current SD cards reaching 128GB capacity, you can record more than 30 hours of high-quality videos without changing the card.

Aim SmartyCam HD




Designed To Withstand Extreme On-Track Working Conditions

Frail things have a bad time on track. An on-board camera designed for Motorsport, must guarantee great resistance against the extreme working conditions typical of track racing and against the most adverse weather, such as: strong and prolonged vibrations, storms, continuous rain, and extreme high and low temperatures.


Designed To Withstand Extreme On-Track Working Conditions


That is why SmartyCam HD Rev2 is made in machinery moulded aluminium used in many competition car parts. The SmartyCam HD Rev2 is the most robust and reliable system ever.


Designed To Withstand Extreme On-Track Working Conditions


Compact, handy and easy to Install

Its small size (87x63x49mm) and light weight (just 280g) make SmartyCam HD easy to install inside your car or on your bike.




Smartycam Motorsport Camera Systems

Shipping & Delivery

Delivery – Effort will be made to deliver the goods as soon as possible after your order has been accepted, and in any event within the time stipulated. Customer will receive goods in duration 2-5 days upon payment confirmed, Non Malaysia address will be depends on custom clearance of particular country. We will not be liable for any loss or damage suffered by you through any reasonable or unavoidable delay in delivery. In such case, we may inform you of the reason of the delay and will provide updates of the delivery as soon as we can.

The Saturday delivery service starts from 9:00am till 1:00pm. Orders must be placed before 5:00pm on Friday and all items must be in stock to qualify for delivery on the coming Saturday.

Returns – Goods which are proved to be unsuitable may be returned for refund, credit or exchange if they are returned to ourselves within 14 days of receipt. Returned goods are subject to the following conditions:

  • Items are returned with carriage paid but the customer.
  • Items are received in good condition to be able to resell.
  • Items and original packing of the goods should be returned unused in their original condition in order to secure a refund. (We reserve the right to levy a charge to replace product packaging which is damaged or defected).
  • Any items which have been specially ordered for you or manufactured to your specifications will not be refunded.
  • Item returns are to be accompanied by the sender’s name and address, account number, order invoice number (which are found on the invoice), and reason for return. Please complete the relevant returns form.
  • Items returned needs to have a written confirmation before sending the items back to us.
  • We cannot accept responsibility for returned parcels which are undelivered, please retain your proof of postage or relevant documents to be able to track the parcel, you may require it on the event of a claim with your carrier.

Please contact our Customer Service Department for this – +6 03- 5633 3922/

+6 016-700 9090 (Wechat/Whatsapp) or email to admin@momentumautoparts.com

Momentum Autoparts Sdn Bhd are not responsible for any labour charges incurred during installation or removal of allegedly faulty (or incorrectly supplied) parts.

Shortages & Damage – Please advise our Customer Service Department of any problems with shortages or carrier damage within 5 working days of receipt. We regret that beyond this time, due to circumstances beyond our control we may be unable to process your claim.

Special Order – On any special order of items that we do not stock, we reserve the right to charge a full payment including freight charges order value to the customer’s credit/debit card, which is non-returnable in the event of cancellation, based upon the customer’s implicit instructions to order the goods on their behalf.

Please contact our customer service department, quoting your customer account number and order number if you have any questions or queries. You can do this by telephone directly on +6 03-5633 3922 / +6 016-700 9090 or email to admin@momentumautoparts.com